Heavy Duty Steel Driveway Grates Grating
Heavy Duty Hot Dip Galvanized Grille Plate Steel Driveway Grates
Grating
Steel Driveway Grates Grating Introduction
Series 1 (spacing 30mm) steel grid plate is the most commonly used
type, the use of products in various industrial fields, this series
of steel grid plate under load flat steel center distance of 30mm,
in line with the provisions of the United States standard, in the
whole series of steel grid plate, the surface impact has the
strongest resistance.
It is widely used in power plants, refineries, sewage treatment
plants, granaries, chemical plants, highways, airports and docks
and other platforms, walkways and drainage ditch cover, stairs, and
so on.
Among them, the toothed steel grates can be used for wet and
slippery places, especially for offshore oil production platforms.
Series 2 (40 mm spacing) steel plate is the most economic the most
portable, meet the requirements of British standard fixed platform,
walkway and the specifications of the stairs, in small span of
situation, this is the most ideal products, even in the aisle as
under the load of transportation equipment is also no exception,
also can be used to do a warehouse shelves, a castle in the panel,
pier, protection fence, sun shade, etc.
Series 3 (60mm pitch) steel grates are specially developed for use
in the mining industry to solve the problem of mineral splashing on
the surface of the plate.
This series of steel grid plate has nominal size of 50*60mm
through, allowing most of the splash material to fall through, thus
ensuring the clean and safe surface, this product is often
specified in the crushing system of the plate, the conveyor line of
the corridor and ball mills, processing plants and transfer
stations.
Steel Driveway Grates Grating Specifications
| | Specification of bearing bar(width×thickness) |
| | | | | |
| | | | | | | |
| | | | | | |
| | | | | | | |
| | | | | | |
| | | | | | | |
| | Specification of bearing bar(width×thickness) |
| | | | | |
| | | | | | | |
| | | | | | |
| | | | | | | |
| | | | | | |
| | | | | | | |
Steel Driveway Grates Grating Application:
Steel grates are suitable for alloys, building materials, power
plants, boilers.
Shipbuilding.
Petrochemical, chemical and general industrial plants, municipal
construction and other industries, with ventilation, light,
anti-skid, strong bearing capacity, beautiful and durable, easy to
clean, easy installation and other advantages.
Steel plate has been widely used in all walks of life both at home
and abroad, mainly used for industrial platform, staircase pedal,
banister, channel floor, railway bridge service, high tower
platform, the drain cover, manhole covers, road barrier,
three-dimensional parking lot, organs, schools, factories,
enterprises and institutions, the stadium fence, garden villa, also
can be used as a residence outside the window, balcony guardrail,
Parapets, etc of highways and railways.
Steel Driveway Grates Grating Advantages:
1: high strength, light structure
2: strong anti-corrosion ability, durable
3: beautiful appearance, bright surface
4: no dirt, no rain and snow, no water, self-cleaning, easy to
maintain
5: ventilation, lighting, heat dissipation, anti-skid,
explosion-proof good
6: easy to install his folding unloading
Production Process:
Pressure welding steel grid plate is made of load flat steel and
cross bar according to a certain distance by adopting 200 tons of
hydraulic resistance welding automation equipment welding into the
original plate, after cutting, opening, wrapping and other
processes and products customer requirements.
Load flat steel spacing: the center distance between two adjacent
load flat steel, commonly used 30MM, 40MM and 60MM three.
Rod spacing: the center spacing of two adjacent bars is usually
50MM, 100MM, two kinds
Installation Method:
In order to prevent the risk of falling, the installation of the
steel grid plate should be fixed by welding as far as possible.
The steel grid plate shall be installed in accordance with the
steel structure plate. After installation, it shall not be moved
laterally or separated from the supporting frame. The supporting
length at both ends of the steel grid plate bearing the flat steel
direction on the supporting frame shall not be less than 25 mm for
each section.
Platform steel grille plates that require removable and detachable
are secured by the mounting fixture of the steel grille plates.
Prevent any shift of the member;
The requirements of the buyer can be supplied by the manufacturer.
In addition to the installation clip made of stainless steel
material, the installation clip made of carbon steel is treated by
hot dip galvanizing. It is suggested that the bolts used for the
installation clip are treated by hot dip galvanizing.
